ShuttleSub does support terminal printers as boarding pass printers. Printers can be assigned per workstation. The printed boarding pass will shot the route, departure time and QR code with the booking code.
You will need to install the ShuttleSub Print application on your computer. We have this app available for Windows and MacOS.
Unfortunately we will not develop an app for MacOS Intel
STAR TSP100III
We have tested the system with a STAR TSP100III on ethernet. For STAR a driver is required to install for your computer to recognize the printer settings. Find the official drivers on their website: https://starmicronics.com/support/products/tsp100iii-support-page/
The STAR TSP100III must be connected to your computer. To do so, you need to follow the steps below.
MacOS
Open System Settings > Printers & Scanners > Add Printer, Scanner of Fax.
In the top, click on IP.
Enter the IP Address from your printer (in our case 192.168.2.32)
Protocol: HP Jetdirect - Socket
Enter the name of your printer (for you to recognize it)
Enter the location (for example: Reception Left)
Use: Star TSP100 Cutter
